Table of Contents
Advertisement
7
Notes on operation
7.1
Checking the operating conditions prior to starting up
7.1
Checking the operating conditions prior to starting up
54 / 71
Never operate the ELHY
faulty or not ready for operation.
The junction box must always be locked. Access must only be
granted to authorised staff who have received corresponding training
and safety briefings.
If there are power supply faults, switch the ELHY
immediately.
The ELHY® thruster is assembled and connected according to
regulations (⇒Assembly and installation section).
The permissible voltage and frequency tolerances are adhered to
(⇒Technical data chapter, Voltage and frequency tolerances
section).
The ELHY® thruster is filled with the operating fluid prescribed
for the usage conditions (⇒ Technical data chapter, Ambient
temperature and installation height section) and for the version,
and has the required fill level (⇒Maintenance chapter, Operating
fluid section).
The ELHY® thruster is protected against contamination.
The fastening bolts on the thrust shackle and the foot attachment
must be secured to prevent them moving inadvertently (e.g.
using locking pins).
The axes are parallel.
®
thruster with electrical connections that are
ELHY-Montageanleitung_2021_EN.docx
®
thruster off
Advertisement
Table of Contents
