Table of Contents
Advertisement
2
Safety
2.4
Personal protective equipment
2.4
Personal protective equipment
2.5
Electrical operating equipment
16 / 71
Contact EMG Automation GmbH if the required staff responsibilities
are unclear.
The operating company must prescribe personal protective
equipment according to the danger risk.
Personal protective equipment includes the following among others:
Safety shoes, work clothing, protective clothing if required
Protective gloves
Hard hat
Safety goggles
This list of personal protective equipment is not exhaustive.
Work on electrical equipment must be carried out exclusively by
electricians.
When performing any work on electrical components, the five
safety rules must be adhered to:
– Disconnect from the electrical supply
– Safeguard to prevent a restart
– Test to ensure a de-energised state
– Earth and short-circuit
– Cover or isolate adjacent live parts
Perform regular checks for insulation and housing damage.
Never operate the ELHY
that are faulty or not ready for operation.
If there are power supply faults, the system must be switched off
immediately.
Before any work on electrical components, switch the mains
disconnection thruster off and secure it to prevent it being
switched on again.
It is essential to observe the inspection and maintenance
intervals specified by the manufacturer for electrical components.
®
thruster with electrical connections
ELHY-Montageanleitung_2021_EN.docx
Advertisement
Table of Contents
