9
Maintenance
9.1
Maintenance tasks
9.1.2
Checking the operating fluid
60 / 71
WARNING
Hot operating fluid
Risk of burns due to hot oil plumes when opening the filling screw
when at operational heat.
– The operating fluid may only be checked, topped up or
drained when switched off and cool.
®
– The ELHY
thruster may only opened at a maximum
temperature of 40 °C.
NOTICE
If not filled sufficiently, the ELHY
lifting force.
If the liquid level is too high, the expansion of the medium due to
self-heating can cause an impermissible overpressure.
Observe the disassembly instructions if the ELHY
not installed upright (⇒ Disassembly chapter).
Place the ELHY
®
Open and remove the screw plug
Remove the regulating plug from the filling nozzle.
Check the fill level according to the ELHY
required.
®
thruster does not develop the full
thruster upright.
ELHY-Montageanleitung_2021_EN.docx
®
thruster is
®
type and top up if