Table of Contents
Advertisement
2.6
Process media
2.7
Modifications
2.8
Spare and wear parts
ELHY-Montageanleitung_2021_EN.docx
All touchable, conductive parts of the system are connected to
the external earthing conductor system. The earthing conductor
system must be inspected after performing maintenance work
(e.g. replacing components).
Some equipment (e.g. mains power units, servo controllers,
converters) with electrical intermediate circuits may store
residual voltage for a certain time after being disconnected.
Before starting work on these systems, check that they are de-
energised.
The instructions on the manufacturer's material safety data
sheets must be followed.
Contact with eyes or the skin should be avoided.
Avoid inhaling vapours or mist.
Soak up any spilled or leaking process media immediately with a
binding agent and dispose of it properly.
Keep containers with flammable substances and compressed,
liquefied gases away from sources of heat.
Changes, attachments and modifications to ELHY
which could impair safety or functions may not be performed without
written approval from the manufacturer.
The use of spare and wear parts from third-party manufacturers may
lead to risks. Only original parts or spare and wearing parts approved
by the manufacturer may be used.
For information regarding replacement part orders for ELHY
types that can no longer be supplied, see the "Ordering notes
for replacement thrusters" list.
Safety
Process media
2.6
®
components,
®
17 / 71
2
Advertisement
Table of Contents
