Table of Contents
Advertisement
6
Assembly and installation
6.1
Assembly
6
Assembly and installation
6.1
Assembly
42 / 71
The following safety regulations must be adhered to before beginning
®
any work on ELHY
Ensure that the industrial system is shut down
De-energise the system
Safeguard the system to prevent it being switched on again
Test to ensure a de-energised state
Earth and short-circuit
Cover or isolate adjacent live parts
®
The ELHY
thruster may only be assembled by specialists (e.g.
industrial mechanics/electricians) with many years of experience.
WARNING
Cylinder movements
Risk of crushing between surrounding hindrances and the cylinder
or connected components.
– When assembling, ensure sufficient free space to prevent
crushing.
– Take alternative measures to safeguard this hazard point.
WARNING
Hot surface
During operation, the surface of the lifting device can heat up to
100 °C. If there are components in the direct vicinity that are not
designed for these temperatures (low ignition temperature), there is
a danger of fire.
Contact may cause burns
– Pay attention to the high temperatures during planning and
assembly (minimum distances, avoid heat accumulation).
– The lifting device must be positioned so that it cannot be
reached during operation.
thrusters:
ELHY-Montageanleitung_2021_EN.docx
Advertisement
Table of Contents
