Displaying The Supply Voltage; Displaying The Temperature; Band Edge Beeper - Yaesu FTM-3207DE Operating Manual

Miscellaneous Settings

Displaying the Supply Voltage

Display the Power Supply voltage.
Note: See Setup Menu Item "DC VOLT 9" on 42.

Displaying the Temperature

Indicates the current temperature inside the transceiver's case.
Note: See Setup Menu Item "TEMP 42" on 44.

Band Edge Beeper

The FTM-3207DR/DE will automatically "beep" when the receiver's band edge is encoun-
tered during scanning (either in standard VFO scanning or during PMS operation). You
may additionally enable this feature (band edge beeper) when the frequency reaches the
band edge while selecting the VFO frequency manually, using the DIAL knob.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
41
FTM-3207DR/DE Operating Manual