Scanning; Basic Scanner Operation; Scan Resume Options; Memory Skip Scanning - Yaesu FTM-3207DE Operating Manual

Basic Scanner Operation

Before activating the scanner, make sure that the Squelch is set to silence the back-
ground noise when no signal is present. Scanning is not possible while the Squelch is
open (if noise or signals are being heard).
Scanning may be started or stopped using the micro-
phone [ UP ] or [ DWN ] button.
The following techniques are used for scanning:
r in the VFO mode, press and hold either the [ UP ]
or [ DWN ] button for one second, to start upward or
downward scanning of the band.
r In the Memory mode, press and hold either the
[ UP ] or [ DWN ] button for one second to start chan-
nel scanning toward a higher or lower-numbered
memory channel, respectively.
r Scanning pauses when a signal opens the squelch, and the decimal point on the dis-
play will blink. You can choose one of three scan-resume modes (described later).
r To halt the scan manually, the easiest way is to push the PTT switch on the microphone
momentarily (no transmission will occur while you are scanning). The scan may also be
halted manually by pressing the microphone [ UP ] or [ DWN ] button, or the [ V/M ( MW )] key.

Scan Resume Options

Select which of the three resume scan modes is to be performed after the scanning stops.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Memory Skip Scanning

Memory channels which you do not want to receive can be skipped during scanning.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Preferential Memory Scan

Set up a "Preferential Scan List" of channels which you can "flag" within the memory system.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Programmable Memory Scan (PMS)

Using the dedicated PMS memory channels, only the frequencies within the specified
frequency range will be scanned.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).

Priority Channel Scanning (Dual Watch)

Scanning features include a two-channel scanning capability which allows you to operate
on a VFO, Memory channel, or Home channel, while periodically checking a user defined
Memory Channel for activity.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
FTM-3207DR/DE Operating Manual

Scanning

DWN UP
MIC
ABC DEF
1 2 3 A
GHI JKL MNO
4 5 6 B
PQRS TUV WXYZ
7 8 9 C
0 D
DTMF MICROPHONE
MH-48
33