Base Station Installation; Ac Power Supplies - Yaesu FTM-3207DE Operating Manual

Base Station Installation

The FTM-3207DR/DE is ideal for base station use as well as in mobile installations. The
FTM-3207DR/DE is specifically designed to integrate into your station easily, using the
following information as a reference.

AC Power Supplies

Operation of the FTM-3207DR/DE from an AC line requires a power source capable of
providing at least 20 Amps continuously at 13.8 Volts DC. The FP-1023 (USA market
only) and FP-1030A (USA/EXP market only) AC Power Supplies are available from your
Yaesu dealer to satisfy these requirements. Other well-regulated power supplies may be
used as well, if they meet the above voltage and current specifications.
Use the DC power cable supplied with the transceiver to make the power connection to
the power supply. Connect the RED power cable lead to the POSITIVE ( + ) power supply
terminal, and connect the BLACK power cable lead to the NEGATIVE ( – ) power supply
terminal.
Rear panel
FTM-3207DR/DE Operating Manual
Power cable
(DC 13.8 V)
Fuse holder
Black
DC power supply
cable (supplied)
Red
AC power
outlet
Installation
Direct current
power supply
11