Miscellaneous Settings
Displaying the Supply Voltage
Display the Power Supply voltage.
Note: See Setup Menu Item "8 DC VOLT" on page 32.
Displaying the Temperature
Indicates the current temperature inside the transceiver's case.
Note: See Setup Menu Item "44 TEMP" on page 34.
Band Edge Beeper
The FTM-3200DR will automatically "beep" when the receiver's band edge is encoun-
teredduring scanning (either in standard VFO scanning or during PMS operation). You
mayadditionally enable this feature (band edge beeper) when the frequency reaches the
bandedge while selecting the VFO frequency manually, using the DIAL knob.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
31
FTM-3200DR Operating Manual