OSEE LCM156-A User Manual page 56

Menu Operations
Select USER CONFIG Time Code item to enable the display of
embedded timecode on screen, only valid for SDI input signal.
Timecode is displayed as the format of "HH:MM:SS:FF" at the bottom
center of the screen, and if there is no available timecode, it will not
appear.
Display Status Menu
4.
Set USER CONFIGStatus Display item as ON, the status menu will
be displayed in the top left corner of the screen, and it includes the input
channel and signal format.
Switch Menu Language
5.
Set USER CONFIGLanguage item as Chinese or English, and the
default menu language is English.
Monitor Reset Defaults Setting
6.
Select USER CONFIGMonitor Reset item, it will pop up a prompt, as
shown in Figure 5.1-27:
Figure 5.1-27 Prompt for Monitor Reset
Press right arrow(
OK/MENU button to confirm the selection, the menu settings will restory
to factory defaults.
Figure 5.1-26 Timecode
) button to select RESET command, and click
50