Table of Contents
Advertisement
Marker
Area Marker
Cross Hatch
MARKER MAT
2.
The marker mat marks the outside area of the marker display with the
appointed transparency.
For example, set ASPECT as 16:9, Aspect Marker as 4:3, and Area
Marker as 95%, then, the comparison of the three Marker Mats are as
shown in Figure 5.1-13:
MARKER FIT
3.
The USER CONFIG Marker Fit item is used to whether set up the
connection between area marker and safety marker.
Set Marker Fit item as OFF, the safety area is based on the whole current
image display, while Set Marker Fit item as ON, the safety area is in the
range of area marker, the comparisons are as shown in Figure 5.1-14
Illustration
Figure 5.1-13 MARKER MAT
Figure 5.1-14 MARKER FIT
Description
This marker displays a
rectangle to identify the
safety
specified percentage.
This
multiple
horizontal lines to help
when users check the
composition of a picture.
43
Menu Operations
area
with
a
marker
displays
vertical
and
Advertisement
Table of Contents
