Table of Contents
Advertisement
Unpack and Installation
Connect required cables for signal input and output. For BNC
3.
connections use 75Ω rated connectors.
Connect 100～240V50/60Hz AC or 11～17V3A DC power source
4.
using the power cord, or 11～16.8V DC camera battery(with
optional battery plate).
Connect the power cord to the power interface.
5.
Fasten the power protect accessory.
6.
As a final step, turn on the device by pressing the corresponding
7.
power switch located on the front panel.
Figure 3-1 Stands Assembly
Figure 3-2 Stands for LCM156-A
8
Advertisement
Table of Contents
