Table of Contents
Advertisement
diverse, as shown in the following table:
Camera LUT Type
Camera SDR
Camera HDR
User or OFF
Load a user LUT from disk
2.
First, load a LUT file to the designated user LUT. Set COLOR
Management Load LUT File, it will pop up the USB LUT Files
selection window as shown in Figure 5.1-6. Select USER item, and when
detecting USB disk, it will pop up a file selection window, press the arrow
button to select a LUT file, press OK/MENU button to confirm the selection,
and it will pop up a USER file selection window, press the arrow button to
choose from User1~ User16 to set the storage path for the selected LUT.
For example, select User1, and press OK/MENU button to confirm the
setting.
Second, power off the device, and restart it to affect the settings above.
At lase, set COLOR Management Camera LUT as User item, and set
COLOR Management User as User1 selected as above. The LUT file
will take effect.
Make sure to restart the device to effect the selected user LUT file after
loading it to a designated user LUT through the USB disk.
The items about RED/GREEN/BLUE GAIN are available only in USER1
and USER2 mode. If the COLOR TEMP is set to USER1 or USER2 with
customized settings, you can select the menu item COLOR
Gamma
1.8/2.2/2.4/2.6/2.8/BT.1886
PQ/HLG
1.8/2.2/2.4/2.6/2.8/BT.1886/PQ/HLG
Figure 5.1-6 USB LUT Files
31
Menu Operations
Advertisement
Table of Contents
