OSEE LCM156-A User Manual page 50

Menu Operations
 The Aspect Marker, Center Marker and Area Marker feature are
available only when the Marker item is set to ON.
 The safety marker area will change with the area marker when setting
Marker Fit item to be ON.
 The cross hatch lines will display only in the single image or in PIP mode
when Cross Hatch is ON.
5.1.4.4 DISPLAY Menu
The DISPLAY menu items are displayed on Page4 in USER CONFIG
menu, and they are used to adjust the parameters displayed on the screen,
the menu items are as shown in Figure 5.1-15:
Figure 5.1-15 USER CONFIG Menu-Page4
Display Location
1.
Set the location of waveform, vectorscope and histogram by USER
CONFIG  Waveform Location/ Vectorscope Location/ Histogram
Location separately, the available locations on the screen are as shown
in Figure 5.1-16:
44