Table of Contents
Advertisement
Menu Operations
Figure 5.1-22 Illustration for FOCUS ASSIST Function
FALSE COLOR-Exposure Assist
2.
FALSE COLOR is also known as EXPOSURE ASSIST, this function
generates an artificial luminance map of the input signal that can be useful
to identify over exposed areas(exposure). This is a quick way to gauge the
exposure levels of an image in a clear way.
Choose the False Color tool to activate the FALSE COLOR function. It
provides multiple types of FALSE COLOR types: Spectrum, SONY Slog3,
SONY Slog2, ARRI LogC, Canon Clog2, Canon Clog3, Panasonic Vlog,
RED RedLogFilm, RED RL3G10, BMD, BMD 4K, ARRI Rec709, SONY
LC709A, SONY LC709, Panasonic V709, RED G3, RED G4.
For example: Set USER CONFIG False Color item as ON and False
Color Type item as ARRI LogC, as shown in Figure 5.1-23:
Figure 5.1-23 Comparison Mode- Original Image and Normal Mode
ZEBRA
3.
The ZEBRA function is used to display images on the screen with a zebra
pattern to adjust the camera exposure parameter. It will compare the
signal luminance with the Zebra Level, and fill the relevant image area
whose luminance is higher than the Zebra Level with a zebra pattern.
For example, set the Zebra Level as 80, the compared results are as
Image
48
Advertisement
Table of Contents
