Fitting Dimmer Number Strips - ETC SMARTRACK User Manual

Smartrack User Manual

4.10.8 Fitting dimmer number strips

Self adhesive numbering strips are provided to give smart and permanent
identification of dimmer numbers on the front of the rack. Each Smartrack
is provided with one sheet containing the numbers 1–240. Spare sheets
and higher numbers are available from ETC, under the following part num-
bers:
a)
b)
c)
Peel off numbering strips
and press into place on the
front panel.
Spare sheets of numbers
may be obtained from
ETC distributors.
page 30
2000A4000
2000A4001
2000A4002
2000A4003
Simply peel off the numbers required and cut strips to length with a
pair of scissors as necessary.
Press into place above the appropriate circuit breakers, in the detent
left by the cutout in the door's graphic layer.
Fill any gaps (to the right of the circuit breakers on 5kW and 10kW
dimmers) with the blank strips provided.
181 182 183 184 185 186 187 188 189 190 191 192
1–240
241–480
481–720
721–960
ETC Ltd