ETC SMARTRACK User Manual page 33

Smartrack User Manual
Wiring the power feeds from
the power terminals to the
Power Assembly. The three
phase wires are terminated
into the caged terminals on
the three blocks of dimmer
circuit breakers.
For the sake of clarity, only
one Power Assembly
connection is shown.
Tip:
Run the three phase
wires past the neutral
terminal as shown;
this makes it easy to
retrofit RCDs later, if
required.
page 26
E
L1
L2
L3
N
ETC Ltd
N
L1 L2
L3