Smartrack Operational Summary; Accessing The Control Panel - ETC SMARTRACK User Manual

Smartrack User Manual

6. Smartrack operational summary

0 0 1
0 0 1

6.1. Accessing the control panel

Smartrack's control panel is normally disabled, to prevent unauthorised access,
which could have potentially disastrous results. When the enter LED is off, the
control panel is disabled.
To access control panel user mode:
a) Press enter for three seconds. When the enter LED lights, you are in user
mode, with access to the main control panel functions.
b) To lock the control panel again, press enter any time the enter LED is on,
but not flashing.
NOTE: For security reasons, the control panel will automatically lock up if no key
is pressed for a three minute period.
page 42
DMX
L1
L2 DMX
L3 temp
dimmer profile
ETC Ltd
level
speed enter