Profile Mode; Speed Mode - ETC SMARTRACK User Manual

Smartrack User Manual
You can flash through the rack by setting the rotary pot to a level, then
using the
this, the previously used dimmer will go out, and only the currently select-
ed dimmer will be set to the level on the pot.
Warning: if the pot is set to a high level, selecting ALL will
turn on all dimmers.
Note that levels set in this way are lost as soon as dimmer mode is exited.

6.3.2 Profile mode

A full explanation of dimmer profiles is given in section 6.8.
To view or change dimmer profile settings:
a)
b)
c)
d)
e)

6.3.3 Speed mode

For a full explanation of Response Speed settings, see section 6.9.
To view or change response speed settings:
a)
b)
c)
page 44
key repeatedly, to advance to the next dimmer. When you do
Press dimmer to enter dimmer mode. The dimmer LED is lit.
Select one or all dimmers, using the
Press profile to enter profile mode. The profile LED is lit, and the pro-
file for the selected dimmer(s) is displayed.
Select a new profile, using the
indicating that the profile displayed is not that recorded for the select-
ed dimmer(s).
Press enter to record or dimmer to return to dimmer mode without
changing the profile setting.
Press dimmer to enter dimmer mode. The dimmer LED is lit.
Select one or all dimmers, using the
Press speed to enter response speed mode. The speed LED is lit, and
the response speed for the selected dimmer(s) is displayed.
and keys.
and keys. The enter LED flashes,
and keys.
ETC Ltd