Remote Control - Sena SP38 User Manual

4. Now two 20S headsets (A & C) and two non-Sena Bluetooth headsets
(B & D) are connected with the four-way Universal Intercom.
(B)
You may disconnect a four-way Universal Intercom using the same
way as you do in a normal four-way intercom. Please refer to section
15.2.4, "End Multi-way Intercom".
18.4.2 Four-way Universal Intercom Case 2
Three 20S headsets (A, C and D) and one non-Sena Bluetooth headset (B).
The procedure is the same as case 1 described in section 18.4.1.
(B)
(A)
(C)
(D)
(A)
(C)
(D)

19 REMOTE CONTROL

You can remotely control the 20S via Bluetooth using the Remote
Control (sold separately). This eliminates the need to take off your
hand for button operations. Your 20S and the Remote Control must be
paired together before use.
1. Turn on the 20S and the Remote Control.
2. Press the Jog Dial for 12 seconds to enter the configuration
menu. Rotate the Jog Dial until you hear a voice prompt saying,
"Remote control pairing". Press the Phone Button to enter into
Remote Control Pairing mode and the red LED will flash rapidly
and you will hear multiple beeps. Please refer to section 21.16,
"Remote Control Pairing" for more details.
3. Enter Bluetooth pairing mode on your Remote Control. The 20S
will automatically perform pairing with the Remote Control in
pairing mode. You will hear a voice prompt, "Remote control
connected", when they are successfully connected.
20S
43