Assigning Speed Dial; Enabling/Disabling Audio Multitasking - Sena SP38 User Manual

20S

21.1 Assigning Speed Dial

Voice Prompt
Factory Default
Execute
1. To assign a phone number as a speed dial, rotate the Jog Dial
until you hear a voice prompt saying "Speed dial".
2. Tap the Phone Button, and you will hear voice prompts saying
"Speed dial one" and "Phone connected".
– Rotate the Jog Dial to select one of three speed dial numbers
and you hear a voice prompt saying "Speed dial (#)".
3. Call a phone number you want to assign and you will hear a voice
prompt saying "Save speed dial (#)". The phone number is
automatically assigned to the selected speed dial number. Then
the phone call will hang up before being connected.
4. To exit the menu, rotate the Jog Dial clockwise or counter clockwise
until you hear a voice prompt saying "Exit", and tap the Phone
Button to confirm. You will then hear a voice prompt saying "Exit".
If any button is not pressed within 1 minute, the 20S will exit the
configuration menu and go back to stand-by mode.
46
"Speed dial"
N/A
Tap the Phone Button
Note:
1. After assigning a phone number to one of three speed dials, you can
continually assign another phone number to the rest of two speed dials.
2. You can also assign phone numbers for speed dialing by using the
Device Manager software or the Sena Smartphone App. Please visit the
Sena Bluetooth website at www.sena.com for more information.

21.2 Enabling/Disabling Audio Multitasking

Voice Prompt
Factory Default
Enable
Disable
Audio Multitasking allows you to have an intercom conversation while
simultaneously listening to music, FM radio, or GPS instructions. The
overlaid audio is played in the background with reduced volume
whenever there is an intercom conversation and will return to normal
volume once the conversation is finished. If this feature is disabled,
any incoming or outgoing intercom will interrupt your audio channel.
"Audio multitasking"
Enable
Tap the Phone Button
Tap the Jog Dial