Reset To Factory Default Settings - Sena SP38 User Manual

Rotate Jog Dial Tap Phone Button
Speed Dial
Audio Multitasking
Intercom-audio Overlay
Sensitivity
Navigation App Support
Audio Boost
Motion Sensor Sensitivity
VOX Phone
HD Intercom
Eight-way Intercom
Voice Prompt
Sidetone
Advanced Noise Control
Delete All Pairings
Remote Control Pairing
Universal Intercom Pairing
Exit Configuration
Voice Configuration Menu & Button Operations
Tap Jog Dial
Execute N/A
Enable Disable
Execute N/A
Enable Disable
Enable Disable
Execute N/A
Enable Disable
Enable Disable
Enable Disable
Enable Disable
Enable Disable
Enable Disable
Execute N/A
Execute N/A
Execute N/A
Execute N/A

22 RESET TO FACTORY DEFAULT SETTINGS

1. To restore the 20S to factory default settings, press and hold
the Phone Button for 12 seconds until the LED shows solid red
and you hear double beeps. You will hear a voice prompt saying
"Factory reset".
2. Within 5 seconds, press the Jog Dial to confirm reset. The headset
will be restored to factory setting and switched off automatically.
You will hear a voice prompt saying "Headset reset, good-bye".
3. If you press the Phone Button or don't press the Jog Dial within 5
seconds, the reset attempt is canceled and the headset returns to
stand-by mode. You will hear a voice prompt saying "Canceled".
20S
53