Remote Control Pairing; Software Configuration Setting; Speed Dial; Channel Setting (Default: Channel 1) - Sena MOMENTUM EVO User Manual

11 CONFIGURATION SETTING
11.1.1

Remote Control Pairing

You can remotely control the Bluetooth system using Sena Remote
Control devices (sold separately).
1. Turn on the Bluetooth system and the Remote Control device.
2. Execute Remote Control Pairing.
3. Enter pairing mode in the Remote Control device. The Bluetooth
system will automatically connect with the Remote Control device in
pairing mode.

11.2 Software Configuration Setting

You can change the settings of the Bluetooth system through the Sena
Device Manager or the Momentum EVO Utility App.

11.2.1 Speed Dial

Assign phone numbers for speed dialing to make a phone call quickly.

11.2.2 Channel Setting (Default: channel 1)

If the Open Mesh communication experiences interference because
other groups are also using the channel 1 (default), change the channel.
You can select one of 1 to 9 channels.

11.2.3 Audio Boost (Default: Disable)

Enabling Audio Boost increases the overall maximum volume.
Disabling Audio Boost reduces the overall maximum volume, but
delivers more balanced sound.

11.2.4 Smart Volume Control (Default: Disable)

Smart Volume Control automatically changes the level of the speaker
volume based on the level of the environmental noise. When it is
disabled, volume is controlled manually. You can enable the level
adjustment by setting the sensitivity to low, medium, or high. Smart
Volume Control responds to smaller environmental noises as the
sensitivity level becomes higher.
MOMENTUM EVO Motorcycle Bluetooth Helmet With Mesh Intercom™ | 41
®