Table of Contents
Advertisement
20S
21.15 Delete All Bluetooth Pairing Information
Voice Prompt
Factory Default
Execute
To delete all Bluetooth pairing information of the 20S, rotate the Jog
Dial until you hear a voice prompt saying "Delete all pairings", and
tap the Phone Button to confirm. Tapping the Jog Dial is not available
for this setting.
21.16 Remote Control Pairing
Voice Prompt
Factory Default
Execute
To enter into Remote Control Pairing mode, rotate the Jog Dial until
you hear a voice prompt, "Remote control pairing". Then press the
Phone Button to enter into Remote Control Pairing mode. The headset
will automatically exit from the configuration menu. Please refer to
section 19 for details on remote control.
52
"Delete all pairings"
N/A
Tap the Phone Button
"Remote control pairing"
N/A
Tap the Phone Button
21.17 Universal Intercom Pairing
Voice Prompt
Factory Default
Execute
To enter into Universal Intercom Pairing mode, rotate the Jog Dial until
you hear a voice prompt, "Universal intercom pairing". Then press
the Phone Button to enter into Universal Intercom Pairing mode. The
headset will automatically exit from the configuration menu. Please
refer to section 18.1 for details on Universal Intercom.
21.18 Exit Voice Configuration Menu
Voice Prompt
Factory Default
Execute
To exit voice configuration menu and get back to stand-by mode,
rotate the Jog Dial until you hear a voice prompt saying "Exit
configuration", and tap the Phone Button to confirm. Tapping the Jog
Dial is not available for this setting.
"Universal intercom pairing"
N/A
Tap the Phone Button
"Exit configuration"
N/A
Tap the Phone Button
Hide quick links:
Advertisement
Table of Contents
