Remote Control; Troubleshooting; Maintenance And Care - Sena Momentum SP42 Getting Started

Table of Contents

Tap the Center Button when in this menu to Delete All Bluetooth Pairing Information stored in the headset.

8. REMOTE CONTROL

You can remotely control the Bluetooth Module using Sena Remote Control devices (sold separately) such as a

Handlebar Remote or a Wristband Remote. This eliminates the need to remove your hands from the handlebars

for button operations.

8.1 Pairing with the Remote Control

1. Turn on the Bluetooth Module and the Remote Control device.

2. Execute Remote Control Pairing in the Configuration Menu. Please refer to Section 2.7: "Configuration

Menu" for more details.

3. Enter pairing mode in the Remote Control device. The Bluetooth Module will automatically connect with the

Remote Control device in pairing mode. You will hear a voice prompt, "Remote control connected," when they

are successfully paired.

Please visit sena.com for answers to frequently asked questions. This detailed online FAQ section deals with

troubleshooting, illustrates case studies and contains tips on using the Sena Momentum Bluetooth Helmet.

9.1 Fault Reset

When the helmet's Bluetooth Module is not working properly, you can easily reset the unit:

1. Locate the pinhole reset button below the (+) Button.

2. Gently insert a paper clip into the hole and press and Fault Reset Button for 1 second with light pressure.

3. The communication module will shut down.

Note: Fault Reset will not restore the Bluetooth Module to factory default settings.

9.2 Factory Reset

To erase all of your settings and start fresh, the headset can be restored to factory default settings using the

Factory Reset feature in the Configuration Menu. Please refer to Section 2.7: "Configuration Menu" for more

details.

Table of Contents