Page 1
® Motorcycle Bluetooth Communication System User's Guide www.sena.com...
Page 2
Hero3 allowing for Bluetooth capabilities. ® The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod ® touch are registered trademarks of Apple Inc. Zumo is a trademark of Garmin Ltd.
5.1 Mobile Phone Pairing ......................14 14 INTERCOM PAIRING .................... 30 5.2 Second Mobile phone Pairing ....................15 14.1 Pairing with Other 20S Headsets for Intercom Conversation ..........30 5.3 Bluetooth Stereo Device Pairing ...................15 14.2 Pairing with Other Sena Headset Models for Intercom Conversation .........31 5.4 Bluetooth GPS Navigation Pairing ..................16...
Page 4
21.15 Universal Intercom Pairing ....................49 21.16 Exit Voice Configuration Menu ....................49 22 RESET TO FACTORY DEFAULT SETTINGS ............50 23 FAULT RESET ....................... 51 24 FIRMWARE UPGRADE ..................51 25 SENA BLUETOOTH CONNECTION CASE STUDIES ......... 52 26 OPERATION QUICK REFERENCE ..............60...
• Intuitive voice prompts and voice commands Thank you for choosing the Sena 20S, Motorcycle Bluetooth Communication • HD quality crystal clear and natural sound System. With the 20S, you can call handsfree on your Bluetooth mobile • Bluetooth Audio Recording ™...
2 PACKAGE CONTENTS • Headset Main Unit Phone Button • Answer and end a mobile phone call • Speed dial External Antenna • Call transfer between mobile phone and headset • Enter into mobile phone pairing mode Status LED • Enter into Bluetooth stereo device pairing mode •...
Page 7
• Universal Helmet Clamp • Wired Boom Microphone Speaker Port Microphone Port • Wired Microphone Quick Release Button • USB Power & Data Cable Earbud Port • Cigarette Charger Static Boom Microphone MP3 Port • 2.5 to 3.5mm Stereo Audio Cable •...
3 INSTALLING THE 20S ON YOUR HELMET • Foam Speaker Covers 3.1 Helmet Installation To securely install the 20S on the helmet, please follow this procedure. • Velcro Pads for Speakers 1. Loosen the two screws on the back plate of the clamp unit using the enclosed allen wrench.
Page 9
2. Depending on the size and shape of your helmet, you may need 4. Place the helmet speakers along with the velcro pads, centered to to change the thickness of the rubber pad between the clamp your ear, in the ear pockets of the helmet. If the helmet has deep plates.
Even though the glued surface mounting adapter is provided for 1. Remove the speaker unit from the speaker port. convenience, Sena does not assume any responsibility for use of it. Users 2. Remove the back plate of the clamp unit completely.
3.3 Switching the Microphone 3.3.1 Wired Boom Microphone When installing the included wired boom microphone, place the velcro If you want to use a different microphone instead of the static boom end of the boom microphone between the internal helmet cheek pad and microphone, please refer to the following steps.
4.1 Charging clamp. The sound of the earbuds will be active while the sound of the You can charge the 20S by connecting the supplied USB power & data outer speakers becomes inactive. cable into a computer USB port or USB wall charger. You can use any standard micro-USB cable to charge the 20S.
Simply pair your phone with your 20S headset, run the Sena Smartphone App and you can configure its settings directly from your smartphone. You can download the Sena Smartphone App for Android...
2. Turn on the 20S and remove the main unit from the clamp unit. connected” to a mobile phone, “Media connected” to a Bluetooth 3. Place your mobile phone over the back side of the 20S so that the stereo device.
Jog Dial for 1 second to recover the Bluetooth 5. The mobile phone confirms that pairing has completed and the connection and play. 20S is ready to use. You will hear a voice prompt from the 20S saying “Your headset is paired”.
You will hear the voice prompt, “GPS pairing”. 3. Search for Bluetooth devices on the GPS navigation screen. Select the Sena 20S in the list of the devices detected on the GPS. GPS Pairing 4. Enter 0000 for the PIN.
Bluetooth, you can pair the mobile phone to the GPS to 5.5 Pairing with the Sena SR10, Bluetooth Two-way use your mobile phone. When you do this, the 20S thinks the GPS is a Radio Adapter mobile phone so you can no longer pair your mobile phone to the 20S The Sena SR10 is a Bluetooth two-way radio adapter for group directly.
Page 18
5. If the pairing process is not completed within three minutes, the 20S will return to stand-by mode. The incoming audio from the two-way radio via SR10 is heard in the background while having an intercom conversation or a mobile phone call.
You will hear a voice prompt saying “Phone selective pairing”. 20S. To clear the pairing list on 20S, please do a factory reset or follow 3. Search for Bluetooth devices on your smartphone. Select the the pairing list clearing procedure described in this manual.
– For some older mobile phones which do not automatically 7 MOBILE PHONE CALL MAKING AND transfer calls to the headset, press the Phone Button after entering phone numbers on the mobile phone keypad. ANSWERING – Tap the Phone Button in stand-by mode to activate the voice dialer of your mobile phone.
Phone Button or the Jog Dial. If any button is not pressed within 15 7.3 Intercom and Mobile Phone Call seconds, the 20S will exit the voice speed dial menu and go back 1. When you have an incoming mobile phone call during an to stand-by mode.
8.1 By Stereo Audio Cable Unlike other motorcycle Bluetooth headsets, this prevents a Plug your stereo MP3 player directly to the 20S by using the enclosed user from being dropped out of an intercom conversation by 2.5mm to 3.5mm stereo audio cable. To adjust the volume, rotate the Jog an incoming mobile call.
5.3. The 20S supports the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the 20S to remotely control music playback. Not only can you adjust the volume but you can also use the functions such as play, pause, next track and previous track.
1. Make sure that the antenna is flipped up. If you pair a Bluetooth GPS to the 20S as described in section 5.4, 2. Enter into a two-way intercom and press and hold the Jog Dial for “Bluetooth GPS Navigation Pairing”, you can hear the voice instruction...
10 SENA SR10, TWO-WAY RADIO ADAPTER As described in section 5.5, you can use a two-way radio and the Smart Phone 20S Bluetooth intercom simultaneously by using the Sena SR10, a Two-way Radio Bluetooth Two-way Radio Adapter, along with the 20S. Incoming audio...
1. You can save FM stations to presets before using FM radio. Connect the 11.3 Seek and Save 20S to your PC and open the Device Manager. It allows you to save up to 10 FM station frequency presets on the 20S settings menu. You may do “Seek”...
Button when at that station. You will hear a voice prompt from the Europe 87.5 ~ 108.0 MHz ± 100 kHz 20S saying “Save preset (#)”. The station will be saved as the next preset number. Japan 76.0 ~ 90.0 MHz ±...
Ambient Mode Button. Another way is to double tap the surface of the 20S or the helmet surrounding the 20S. Be careful not to press the Jog Dial during this process. Lastly, you can say, “Hello Sena”...
Page 29
Mode Status Function Voice Command Mode Status Function Voice Command Next track (music) / next “Intercom “Next” Start/End each Intercom preset (FM radio) [one, two, … , nine]” End all intercoms “End intercom” Music / FM Radio Previous track (music) / “Previous”...
Conversation The 20S can be paired with up to nine other headsets for Bluetooth intercom conversation. 1. Turn on the two 20S headsets (A and B) that you would like to pair Pairing A & B with each other. 4. You can pair with up to nine other headsets. To pair with more 2.
Intercom Conversation or the voice commands. Press and hold for 2 seconds to end any The 20S can be paired with all other Sena headset models such as intercom, or use the voice command, “End Intercom”. Or, you the SMH10 and the SMH5 for intercom conversation. Please follow the can single tap to end intercom with the first intercom friend and same procedure as above to pair with these headset models.
15.2.1 Start Three-way Intercom intercom friend (C). You (A) can have a three-way intercom with two other 20S friends (B & C) by establishing two intercom connections at the same time. 1. You (A) need to be paired with two other friends (B & C) for three- way intercom.
Page 33
4. Now you (A) and two 20S intercom friends (B & C) are having a Jog Dial Operation Result three-way intercom. Press for 2” Disconnect (B) & (C) Single tap Disconnect (B) Double tap Disconnect (C) 15.2.3 Start Multi-way Intercom...
Page 34
Rest of the connection of the chain will be preserved. Likewise, double tap will disconnect the intercom connection between you (A) and (C), while preserving rest of the connections. First Friend Second Friend Please note that each participant’s intercom friends are the ones adjacent to each other.
If your intercom friend goes out of range while having an intercom end the call. conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the 20S automatically tries to Start Tap Jog Dial while having a mobile phone call...
Bluetooth handsfree profile. want to group with. 3. Check your friends and press ‘Save to My 20S’ on the screen. 18.1 Universal Intercom Pairing 4. Press ‘Connect’ on the screen or the Ambient Mode Button for 1 The 20S can be paired with non-Sena Bluetooth headsets for Bluetooth second to begin Group Intercom.
20Ss and one non-Sena Bluetooth headset. pairing with non-Sena Bluetooth headsets in pairing mode. 1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another 20S headset (C) for the three-way intercom. 18.2 Two-way Universal Intercom...
18.4 Four-way Universal Intercom 3. The other 20S (C) may join the intercom by making an intercom call to you (A). You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three 20Ss and one non-Sena Bluetooth headset or 2) two 20Ss and two non-Sena Bluetooth headsets.
Page 39
2. The other 20S (C) may join the intercom by making an intercom 4. Now two 20S headsets (A & C) and two non-Sena Bluetooth headsets call to you (A). (B & D) are connected with the four-way Universal Intercom.
Joystick of the Handlebar Remote up or down, it will have an You can remotely control the 20S via Bluetooth using the Handlebar equivalent effect of rotating your 20S Jog Dial. For details on remote Remote (sold separately). This eliminates the need to take off your control button operations, please refer to the following tables or the hand for button operations.
Page 41
Press the Front Button for 2 seconds Voice dial Tap the Front Button Ambient Mode Speed dial Double tap the Front Button Rear Button Button Reject incoming call Press the Joystick for 2 seconds Handlebar Remote - 20S Button Matching Table...
Page 42
Type Function Handlebar Remote Type Function Handlebar Remote Press the Joystick for 6 seconds Press the Front Button for 12 seconds Intercom pairing Reset Factory reset Tap the Joystick Tap the Joystick within 5 seconds Intercom Start/End each intercom Press the Joystick for 1 second Handlebar Remote Button Operation Table End all intercoms Press the Joystick for 2 seconds...
Phone Button, or disable the feature by tapping the Jog Dial. A lower priority function is always interrupted by a higher priority 4. If any button is not pressed within 10 seconds, the 20S will exit the function. For example, stereo music is interrupted by intercom call, configuration and go back to stand-by.
Button to confirm. You will then hear a voice prompt saying “Exit”. Delete all pairings Audio boost If any button is not pressed within 1 minute, the 20S will exit the Noise control Motion sensor sensitivity configuration menu and go back to stand-by mode.
2. You can also assign phone numbers for speed dialing by using the Level Adjustment Rotate the Jog Dial (1~10) Device Manager software or the Sena Smartphone App. Please visit the Sena Bluetooth website at www.sena.com for more information. Apply...
Motion Sensor Sensitivity determines the sensitivity when you double application reduces in volume whenever there is an ongoing intercom tap on the surface of the 20S to enter voice command mode. Rotate the conversation. To listen to your smartphone’s GPS navigation clearly Jog Dial until you hear the voice prompt, “Motion sensor sensitivity”.
Device Manager, or the Voice Prompt “Eight-way intercom” Sena Smartphone App. If this mode is disabled, you have to tap the Factory Default Disable Jog Dial or the Phone Button to answer an incoming call.
- Voice prompts for speed dial - Voice prompts for FM radio functions Note: If you use your 20S with the Bluetooth Audio Pack for GoPro, you can enable 21.11 Enabling/Disabling Sidetone or disable this feature only during Normal Voice Recording. This feature is automatically disabled while in Ultra HD (UHD) Voice Recording mode.
Execute Tap the Phone Button To delete all Bluetooth pairing information of the 20S, rotate the Jog To enter into Universal Intercom Pairing mode, rotate the Jog Dial until Dial until you hear a voice prompt saying “Delete all pairings”, and you hear a voice prompt, “Universal intercom pairing”.
Speed Dial Execute Audio Multitasking Enable Disable 1. To restore the 20S to factory default settings, press and hold Intercom-audio Overlay Execute the Phone Button for 12 seconds until the LED shows solid red Sensitivity and you hear double beeps. You will hear a voice prompt saying...
25 SENA BLUETOOTH CONNECTION CASE STUDIES Case 1 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 GPS Pairing 3 Intercom Pairing Mobile Phone Bluetooth GPS zumo 220/350/550/660/665, TomTom Rider Mobile Phone Pairing Usage • Mobile phone: phone call, listening to music •...
Page 53
Case 3 Case 2 GPS - Mobile Phone Pairing Bluetooth GPS Bluetooth GPS Mobile Phone Mobile Phone Mobile Phone Pairing Pairing Intercom Second Mobile Intercom Pairing Phone Pairing Pairing Mobile Phone Bluetooth Pairing Procedure Bluetooth Pairing Procedure 1 Mobile Phone Pairing 1 GPS - Mobile Phone Pairing 2 Second Mobile Phone Pairing 2 Mobile Phone Pairing...
Page 54
Case 4 Case 5 Mobile Phone Mobile Phone Mobile Phone Pairing Mobile Phone Pairing Intercom Mobile Phone Pairing Pairing Motorcycle Bluetooth Intercom Mobile Phone Audio System Pairing Pairing Bluetooth GPS Music Bluetooth Pairing Procedure 1 Mobile Phone Pairing Bluetooth Pairing Procedure 2 Mobile Phone Pairing 1 Mobile Phone Pairing 3 Intercom Pairing...
Page 55
Case 6 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 GPS Pairing 4 Intercom Pairing Mobile Phone Bluetooth GPS Mobile Phone zumo 220/350/550/660/665, TomTom Rider Pairing Motorcycle Bluetooth Audio System BMW R1200RT, K1600GT, K1600GTL Usage • Mobile Phone: phone call Intercom Mobile Phone •...
Page 56
Case 7 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Second Mobile Phone Pairing 3 Intercom Pairing Mobile Phone Usage • Mobile Phone: phone call Mobile Phone • SR10: two-way radio, GPS guidance, Radar detecting signal Pairing • Intercom SR10 Second Mobile Phone Pairing Two-way Radio...
Page 57
Case 8 Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Intercom Pairing Mobile Phone Mobile Phone GPS - Pairing Pairing Mobile Phone Bluetooth GPS Bluetooth GPS MP3 Player Mobile Pairing Phone zumo 220/350/550/660/665, TomTom Rider Intercom...
Page 58
Case 9 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Second Mobile Phone Pairing Mobile Phone 5 Intercom Pairing Mobile Phone Usage Pairing • Mobile Phone: phone call • SR10: two-way radio, GPS instruction, Radar detecting signal •...
Page 59
Case 10 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing Mobile Phone 4 GPS Pairing 5 Intercom Pairing Mobile Phone Pairing Bluetooth GPS zumo 220/350/550/660/665, TomTom Rider Usage • Mobile Phone: phone call GPS Pairing Intercom •...
Function adjustment incoming call for 2 seconds Double tap the Voice Press the Jog Dial “Pairing Mid-tone surface of the main “Hello Sena!” Green flashing - Red flashing Intercom command for 6 seconds intercom” single beep unit pairing Tap the Jog Dial of any one of the two headsets...
CERTIFICATION AND SAFETY APPROVALS Voice Type Function Button Command Beep Command FCC Compliance Statement Press the Phone Mid-tone FM radio on Button for 2 “FM radio” double beeps This device complies with part 15 of the FCC rules. Operation is subject to seconds the following two conditions: Press the Phone...
Bluetooth SIG, Inc. ® FCC Caution and any use of such marks by Sena is under license. Other trademarks and Any changes or modifications to the equipment not expressly approved by trade names are those of their respective owners.
WEEE (Waste Electrical and Electronic Equipment) SAFETY INFORMATION The crossed-out wheel bin symbol on the product, litera- Please ensure that the product is properly used by observing the ture, or packaging reminds you that all electrical and warnings and cautions below to prevent any risk and/or damage to electronic products, batteries, and accumulators must property.
Product Use • When using the product, drive at a low speed (slower than 35km/h) for • In some regions, it is prohibited by law to ride motorcycles or bicycles safety. In addition, be certain to conform to laws regarding the use of while wearing headsets.
Here, product warranty extends to the product or cause accidents. only. Sena will not be liable for any loss, damage of human life, or loss of • Never use a damaged charger. It may explode and/or cause accidents.
Page 66
By buying and using this product, you relinquish considerable legal rights of Sena (collectively referred to as “the company”) recommend that, including any claim for compensation for damages. Therefore, be certain before using the product and similar devices of any brands including...
In addition to damages which may occur due to the use of the product, on the user regardless of its use by the initial purchaser of a third party. Sena will not be liable for damages of the product which occur due to the following events.