Bluetooth Gps Navigation Pairing - Sena SP38 User Manual

5.4 Bluetooth GPS Navigation Pairing

5.4.1 GPS Pairing
1. Turn on the headset and press the Jog Dial for 6 seconds until the
red LED is rapidly flashing and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button and hear the voice prompt,
"Second mobile phone pairing". Again within 2 seconds, tap
the Phone Button and the LED turns to green flashing and the
beeps turn to multiple mid-toned beeps. You will hear the voice
prompt, "GPS pairing".
3. Search for Bluetooth devices on the GPS navigation screen.
Select the Sena 20S in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.
5. The GPS confirms that pairing has completed and the 20S is
ready to use. You will hear a voice prompt from the 20S saying
"Your headset is paired".
6. If the pairing process is not completed within three minutes, the
20S will return to stand-by mode.
Note:
If you pair your GPS device via GPS Pairing, its instructions will not interrupt
your intercom conversations, but overlay with them.
The pairing diagram for GPS pairing is shown in the figure below.
Smart Phone
HFP
Mobile Phone
+
A2DP
20S
20S
Pairing
HFP
GPS Pairing
GPS
GPS Pairing
19