Setting Smart Volume Control; Setting Motion Sensor Sensitivity - Sena SP38 User Manual

20S

21.6 Setting Smart Volume Control

Voice Prompt
Factory Default
Level Adjustment
Apply
Smart Volume Control automatically changes the level of the speaker
volume based on the level of the environmental noise. When it is
disabled, volume is controlled manually. Rotate the Jog Dial until you
hear the voice prompt, "Smart volume control". By tapping the Phone
Button, it will lead you to the level adjustment mode. You can enable
it by setting the sensitivity to low, medium, or high. Smart Volume
Control responds to smaller environmental noises as the sensitivity
level becomes higher.
48
"Smart volume control"
Disable
Rotate the Jog Dial
(Low/Medium/High/Disable)
Tap the Jog Dial

21.7 Setting Motion Sensor Sensitivity

Voice Prompt
Factory Default
Level Adjustment
Apply
Motion Sensor Sensitivity determines the sensitivity when you double
tap on the surface of the 20S to enter voice command mode. Rotate the
Jog Dial until you hear the voice prompt, "Motion sensor sensitivity".
By tapping the Phone Button, it will lead you to level adjustment mode.
Default is at low, but you may change it to high, or disable the feature
by rotating the Jog Dial. After you have completed the setting, tap
the Phone Button to apply the changes. If this feature does not work
properly, disable this feature, and press on the Ambient Mode Button
to enter voice command mode.
"Motion sensor sensitivity"
Low
Rotate the Jog Dial
(High/Low/Disable)
Tap the Phone Button