Table of Contents
Advertisement
2 General information
Please read these Operating Instructions carefully.
If you have any questions, please contact our Service Department at the address above. Do not, under
any circumstances, open the device yourself, or make any attempt to repair the device. In the event of
warranty claims, please contact your dealer.
In the interest of product improvement, we reserve the right to make technical and optical modifica-
tions to the device.
Designated use
This handheld device has been developed as a reader for a variety of IMKO probes. Only probes
specially designed for this device may be connected to it. If a probe that is not designed for the device
is connected to it, this may damage the device and/or the connected probe.
Rechargeable battery
Never replace the in-built rechargeable battery yourself.
The maximum operating times indicated apply under ideal conditions. The ambient temperature and
recharging cycle can significantly reduce the performance times. In addition, the recharging capacity
drops over time for technical reasons or if the unit is stored at very high or low temperatures.
Charging the HD2 handheld device
Only use the charger supplied or a comparable voltage source to charge the HD2 handheld device.
A different charging voltage can damage the device.
If the device heats up while it is charging, this is normal behavior and is not dangerous.
If the HD2 only works briefly or not at all despite being charged repeatedly, the integrated battery is
defective and must be replaced. Should this occur, please contact your dealer or IMKO directly.
Temperatures and ambient conditions
The HD2 handheld device has been developed for use in heavy-duty environments.
The operation of this device outside the conditions indicated can damage the device.
Page 6
MMP20 SONO Mobil HD2 (option E)
Endress+Hauser
Advertisement
Table of Contents
