Hd2 Mode - Endress+Hauser MMP20 SONO Mobil HD2 Operating Instructions Manual

Overview of the configuration options
Setting

HD2 mode

Material cal.
Find probe
Language
Auto-power-off
Display lighting
Display contrast
Probe info
HD2 info
6.4.1 HD2 mode
The operating mode of the HD2 handheld device can be changed in this menu item.
With the "Single value" option, the user selects an individual measurement of the three probe
parameters: moisture, temperature and EC-Trime.
Depending on the selected calibration, the "moisture" parameter displays the moisture as a volumetric
or gravimetric percent or can output the transit time of the TDR pulse. If the transit time is displayed,
the percentage sign is understood as "Raw value tp".
If the "Average" option is selected, only the moisture is determined - in %vol or %grav depending on
the calibration selected - or the transit time in tp. The measured value is saved in a list of up to six
measured values. The arithmetic average is calculated from this list.
Note: Only a maximum of 6 values can be saved in the list. Older values are removed from
the list and are no longer used to calculate the average.
The "Water calculation" setting activates a mode that indicates the water quantity in the material
being measured in l/m³. To be able to measure larger volumes of material, a material sample can be
taken at several points and an average calculated.
Page 16
Description
Change the operating mode
• "Normal"  measure the parameters "moisture", "temperature"
and EC-Trime
• "Average"  get an average of up to 6 moisture measured values
• "Water calculation"  calculates the water content in l/m
• Select the desired material calibration in the probe
• Customize a material calibration
Search again for a connected probe (if an error occurred during
power-up)
Change the system language
•
German
•
English
Setting for automatic switch-off
Setting for background lighting
•
Switch-off time
•
Brightness
Setting for the optimum contrast
Display information about the probe
Display information about the HD2 handheld device
MMP20 SONO Mobil HD2 (option E)
3
Endress+Hauser