Table of Contents
Advertisement
MMP20 SONO Mobil HD2 (option E)
6.3.3
"Water calculation" operating mode
Only the moisture is measured in this mode. A mean value is calculated from up to six individual
values. The water quantity per m³ is calculated from this mean. The density of the material being
measured must be set to ensure the value is calculated correctly.
Individual measure-
ment values
To delete the measurement series, press the "Down" key
To set the density, press the "Up" key
appears:
Settings
The settings for the HD2 handheld device can be changed and adjusted in a variety of ways. Pressing
the "Settings" key
Press the "Up"
and "Down"
to select it. Press the "Settings" key
Endress+Hauser
Number of the
selected calibration
Set the density of your material with the "Up"
"Down"
your entries.
You return automatically to the measurement window. You
can exit the density setting with the "Settings" key
out changing the old density value.
takes you to the following menu structure:
keys to highlight the desired entry and press the "Measure" key
to exit the current menu item and the "Settings" menu.
Remaining battery
Density in kg/dm³
Average water
content in l/m³
.
in the measurement window. The following screen then
keys and press the "Measure" key
and
to confirm
with-
Page 15
Advertisement
Table of Contents
