Table of Contents
Advertisement
MMP20 SONO Mobil HD2 (option E)
1 Introduction
MMP20 SONO-HD2 is a robust, battery-powered mobile display unit for a variety of probes:
SONO-M1, SONO-M1C, SONO-M2.
The HD2 is a handheld device for displaying the measured values of TRIME moisture sensors, and
has been specifically designed for mobile use in the field.
Area of application
•
IP68 protection for robust use in the field
•
Measuring range: 0% to 100% water content
•
Depending on the hand probe used, material conductivity range: max. 12mS/cm
•
Accuracy: up to +-0.1%
Your benefits
High-tech, mobile measurement of the moisture content of hard-to-measure materials at the speed
of light directly onsite, with the following performance characteristics:
•
Mobile moisture measurement of abrasive materials of average conductivity, such as sand,
gravel, grit and other base materials.
•
TDR moisture measurement technique for precise measured values with a representative
measuring field and "slice-by-slice" radar scanning
•
Up to 15 different material calibration curves are saved directly in the probe.
•
The handy two-rod probe with solid rods can be easily inserted into sand, gravel, expanded
clay and other aggregates.
•
The two-rod probes can be connected to the PC for calibration and data logging via the
SM-USB module.
Endress+Hauser
Page 5
Advertisement
Table of Contents
