Maintenance - VALMETAL PAN-SPEC Manual

MANURE CONTROL

2.2 Maintenance

Turn off the main switch of the control unit to disable the complete power supply system.
•
Always disconnect the main power supply and, if present, block the main switch out
of position before installing, inspecting, adjusting, maintaining or servicing the
equipment. Wait until all mobile pieces have come to a halt and that the capacitor is
discharged.
NOTE: If you need to open a control box other than the main one, the power supply to that box
must also be unplugged.
Automatic Start
•
The system has been designed for automatic operation and the system's mechanical
parts may cause unexpected movements at any time with or without warning. Stay
away from the areas where an accident risk is indicated.
•
Always disconnect the main power supply and, if present, block the main switch out
of position before installing, inspecting, adjusting, maintaining or servicing the
equipment.
•
Never clean the equipment with high pressure or other water jet equipment. The
equipment is sensitive and may be destroyed by the high pressure.
Always keep the boxes closed.
Always keep safety devices in place and operational when the main switch is connected.
The system must not be used unless the electrical installations and the safety devices are
complete and unaltered.
TECHNICAN'S MANUAL V0.3
DANGER
Warning
Caution
2020-02-19
9