Table of Contents
Advertisement
MANURE CONTROL
Analog Input Alarm
8.1.2
You have 5 programmable analog input alarm. Mainly use to create alarm on level
EQUIPMENT: Level use to generate the alarm.
LEVEL %: Target point.
HIGH/LOW: Higher or lower than the target point.
DESCRIPTION: Message that will appear if the alarm is active.
SEQUENCE: If there is a sequence selected, the alarm will only affect the selected sequence. If it
is left at none, the alarm will stop everything.
Output Alarm
8.1.3
You have 5 programmable output to send a signal on any alarm or if a specific sequence is in
alarm.
ADD: Address of the digital output. See section 5.
SEQUENCE: If there is a sequence selected, the output will be activated if the selected sequence
is in alarm. If it is left at none, any alarm will activate the output.
TECHNICAN'S MANUAL V0.3
2020-02-19
20
Advertisement
Table of Contents
