VALMETAL PAN-SPEC Manual page 2

MANURE CONTROL
This document includes the general descriptions and/or technical characteristics of the
mentioned products. It cannot be used to define or determine the adequacy or reliability of said
products for specific user applications. It is the responsibility of each user to conduct a full and
appropriate risk analysis as well as product assessment and testing in regard to the application
to be used and the execution of such application. Neither US Farm System or Valmetal
Automation or any of its subsidiaries and branches may be held responsible for the improper
use of the information contained in this manual. If you wish to suggest improvements or
corrections to this publication, please let us know. No part of this document may be reproduced
in any form or by any means —electronic, mechanical or through photocopies— without the
prior permission of Valmetal Automation
All applicable local safety regulations must be observed during the installation and use of this
product. For safety reasons, and in order to guarantee compliance with the documented
system's data, only the manufacturer is authorized to repair the components.
Whenever the equipment is used for applications which present safety technical requirements,
please follow the appropriate instructions.
Failure to comply with these instructions may result in bodily harm, material damages or
malfunction.
• This manual only explains the use of the control panel.
Please refer to the mechanical manual for important safety
information and instructions relating to the mechanical
system.
TECHNICAN'S MANUAL V0.3 2020-02-19
2