Table of Contents
Advertisement
MANURE CONTROL
TECHNICAN'S MANUAL V0.3
2020-02-19
8 Alarm
In that section, you will have access to the custom alarm programming and the event
programming.
8.1 Custom Alarm
In that section you will be able to program digital input alarm, analog input alarm and output
alarm. In technician mode, press on the ALARM PARAMETER sec
Digital Input Alarm
8.1.1
You have 5 programmable digital input alarm.
ADD: Address of the digital input. See section 5.
DESCRIPTION: Message that will appear if the alarm is active.
SEQUENCE: If there is a sequence selected, the alarm will only affect the selected sequence. If it
is left at none, the alarm will stop everything.
NO/NC: Normally open or normally closed contact.
19
Advertisement
Table of Contents
