Minimize Wear And Avoid Damage - Stihl TS 700 Instruction Manual

20 Minimize Wear and Avoid Damage

The information applies in normal operating condi‐
tions. The specified intervals must be shortened
accordingly when working for longer than normal
or under difficult cutting conditions (extensive
dust, etc.).
Cooling air intake slits
Cylinder fins
Water connection
Carburetor
Spark plug
All accessible screws,
nuts and bolts (not
adjusting screws)
Antivibration elements
Abrasive cutting wheel
Supports / bars / rubber
buffers (underneath the
machine)
Safety information label
20 Minimize Wear and Avoid
Damage
Observing the instructions in this manual helps
reduce the risk of unnecessary wear and dam‐
age to the power tool.
The power tool must be operated, maintained
and stored with the due care and attention
described in this owner's manual.
The user is responsible for all damage caused by
non-observance of the safety precautions, oper‐
ating and maintenance instructions in this man‐
ual. This includes in particular:
1)
STIHL recommends the STIHL servicing dealer
0458-572-0121-E
Clean
Have them cleaned by
1)
a specialist dealer
Inspect
repair by authorized
1)
dealer
Check idle adjustment
– abrasive cutting
wheel must not rotate
Readjust idle speed
Adjust electrode gap
Replace after 100
hours' operation
Tighten
Inspect
Have them replaced by
1)
a servicing dealer
Inspect
Replace
Inspect
Replace
Replace
X
X
X X
X
X
X X
X
– Alterations or modifications to the product not
approved by STIHL.
– Using tools or accessories which are neither
approved or suitable for the product or are of a
poor quality.
– Using the product for purposes for which it
was not designed.
– Using the product for sports or competitive
events.
– Consequential damage caused by continuing
to use the product with defective components.
20.1 Maintenance Work
All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
English
X
X
X
X
X
X
X X
X
X X
X X
X
33