Minimize Wear And Avoid Damage - Stihl TSA 230 Instruction Manual

Hide thumbs Also See for TSA 230:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 44
Minimize Wear and Avoid
Damage
Observing the instructions in this manual
helps reduce the risk of unnecessary
wear and damage to the power tool.
The power tool must be operated,
maintained and stored with the due care
and attention described in this
instruction manual.
The user is responsible for all damage
caused by non-observance of the safety
precautions, operating and maintenance
instructions. This includes in particular:
Alterations or modifications to the
product not approved by STIHL.
Using tools or accessories which
are neither approved or suitable for
the product or are of a poor quality.
Using the product for purposes for
which it was not designed.
Using the product for sports or
competitive events.
Consequential damage caused by
continuing to use the product with
defective components.
Maintenance Work
All the operations described in the
"Maintenance Chart" must be performed
on a regular basis. If these maintenance
operations cannot be performed by the
owner, they should be performed by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
TSA 230
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
If these maintenance operations are not
carried out as specified, the user
assumes responsibility for any damage
that may occur. Among other things,
this includes:
Damage to the motor due to neglect
or deficient maintenance (e.g. not
cleaning cooling air inlets).
Damage to the charger caused by
incorrect electrical connection
(voltage).
Corrosion and other consequential
damage to the machine, battery and
charger due to improper storage
and use.
Damage to the product resulting
from the use of poor quality
replacement parts.
Wear parts
Some parts of the machine are subject
to normal wear and tear even when the
machine is used in conformity with its
intended use. These parts must be
replaced in due time, depending on the
nature and duration of use. These
include, among others:
Abrasive wheel
Battery
English
67

Advertisement

Table of Contents
loading

Table of Contents