Cut-Off Machine Cart; Storing The Machine; Maintenance And Care - Stihl TS 700 Instruction Manual

English

17 Cut-off Machine Cart

19 Maintenance and Care

The information applies in normal operating condi‐
tions. The specified intervals must be shortened
accordingly when working for longer than normal
or under difficult cutting conditions (extensive
dust, etc.).
Complete machine
Controls
Manual fuel pump (if
present)
Fuel pickup body in fuel
tank
Fuel tank
V belt
Air filter (all filter compo‐
nents)
1)
STIHL recommends the STIHL servicing dealer
32
Visual inspection (con‐
dition, leaks)
Clean
Check operation
Inspect
Have them repaired by
1)
a specialist dealer
Inspect
Replace
Clean
Clean / re-tensioning
Replace
Replace
The cut-off machine can be mounted on the
STIHL cut-off machine cart FW 20 (special
accessory) in a few easy steps.
The cut-off machine cart makes it easier to
– repair damaged roadways
– apply roadway markings
– cut expansion joints

18 Storing the Machine

If the machine is to remain out of use for
approx. 3 months or more
► Drain and clean the fuel tank in a well ventila‐
ted place
► Dispose of fuel in accordance with the regula‐
tions and having regard for the environment
► Run the engine until the carburetor is dry, this
helps to prevent the carburetor diaphragms
sticking together
► Remove the abrasive wheel
► Thoroughly clean the machine, especially the
cylinder fins
► Store machine in a safe and dry place. Protect
against unauthorized use (e. g., by children)
X X
X
X X
X
Only if there is a noticeable loss of engine power
17 Cut-off Machine Cart
X
X
X X
X
X
X
0458-572-0121-E
X
X
X