Composite Abrasive Wheels; Diamond Abrasive Wheels - Stihl TS 700 Instruction Manual

English
quality and tailored precisely to the respective
intended use as well as the engine performance
of the cut-off machine.
They are of consistently outstanding quality.
4.1 Transport and storage
– Do not expose abrasive wheels to direct sun‐
shine or other thermal stresses during trans‐
port and storage
– Avoid jolting and impacts
– Stack abrasive wheels flat on a level surface
in the original packaging in a dry place where
the temperature is as constant as possible
– Do not store abrasive wheels in the vicinity of
aggressive fluids
– Store abrasive wheels in a frost-free place
5 Composite Abrasive
Wheels
Types:
– for dry applications
– for wet applications
The proper selection and use of composite resin
cutting wheels ensures economical use and
avoids accelerated wear. The product code
which appears
– on the label and
– on the packaging (table with recommendations
for use) is an aid to selection
STIHL composite resin cutting wheels are suita‐
ble, depending on the version, for cutting the fol‐
lowing materials:
– Asphalt
– Concrete
– Stone
– Ductile cast iron pipes
– Steel; STIHL composite resin cutting wheels
are not suitable for cutting railway tracks
Do not cut any other materials – risk of accident!
14

5 Composite Abrasive Wheels

6

Diamond Abrasive Wheels

For wet applications.
The proper selection and use of diamond abra‐
sive wheels ensures economical use and avoids
accelerated wear. The product code which
appears
– on the label and
– on the packaging (table with recommendations
for use) is an aid to selection
STIHL diamond abrasive wheels are suitable,
depending on the version, for cutting the follow‐
ing materials:
– Asphalt
– Concrete
– Stone (hard stone)
– Abrasive concrete
– Fresh concrete
– Clay brick
– Clay pipe
– Ductile cast iron pipe
Do not cut any other materials – Risk of accident!
Never use diamond abrasive wheels with side
plating as they jam in the cut and can result in
extreme kickback – Risk of accident!
6.1 Product Codes
The product code is a combination of letters and
numbers, consisting of up to four characters:
– the letters denote the main field of application
of the abrasive wheel
D-B10
0458-572-0121-E