Plastic Blank; Memory Switch Settings - JUKI AMS-221EN-HS3020/7200 Instruction Manual & Parts List

8. PLASTIC BLANK

Make a pocket clamp of a plastic blank in accordance with the pocket shape.
Plastic blank (Part number: 40063821)
2 x φ6.5 back 10.5 x
90˚spot facing depth 0.5
(Caution) In the case of the S size pocket, prepare two sheets of plastic blank to make a garment
body clamp and a pocket clamp.

9. MEMORY SWITCH SETTINGS

The memory switches have been factory-set to the set values shown below at the time of shipment. (In this
section, only the items initial values of which are different from those of AMS-221ENHS3020 are described.)
No.
Max. sti/min
Sewing speed 2 at the beginning of sewing
Sewing speed 3 at the beginning of sewing
Sewing speed 4 at the beginning of sewing
Sewing speed 5 at the beginning of sewing
Selection of origin retrieval at the time of "return to
origin" operation
Feeding frame control: Opened/closed by means
of the pedal
Feeding frame control: Stopped at the intermediate
position, and opened/closed by means of the pedal
With/without pedal switch 2 latch
X-Y feed synchronous control (speed/pitch)
With/without stacker operation
Pedal operation A/B changeover
Description
– 15 –
6 x φ4.5 back 8.2 x 90˚
spot facing depth 0.5
Initial value
2000
2000
2000
2000
2000
: Tracing the pattern data
in the reverse order
82
82
: Without
: 2200sti/min / 3.5mm
: Disabled
: Pedal operation A
Thickness: 3 mm
Remarks
Pocket size M
Not used