Installation - AKCP sensorProbe2 User Manual

1) Introduction
1. What is sensorProbe?
What's the difference between SP2 SP4 and SP8?
2.
What's the difference between SP8 and SP8-X20?
3.
4. How to use this manual
5. sensorProbe2
6. sensorProbe4 and sensorProbe8
7. sensorProbe8-X20
8. sensorProbe8-X20 20 Extra Dry Contact Inputs
2)

Installation

1. Assigning an IP address
2. Testing your new IP address
3. Upgrading the firmware
3) Setting up a sensor and Downloading Sensor Data
1. Basic Setup
2. Downloading Sensor Data using Remote Syslog
4) Notifications
1. Setting up a trap
2. Setting up Email notifications
5) System Settings
1. Network Settings
2. System tab
6) Making your unit visible to the internet
7) Quick Facts and FAQ
Updated until firmware 476
NEW: Information on TLS/SSL
- 2 -
SP2/SP4/SP8/SP8-X20 Manual