Advertisement
SP2/SP4/SP8/SP8-X20 Manual
Important Note:
If you're still having trouble connecting to your sensorProbe, or opening your unit's web interface,
please see the FAQ in section #7 at the end of the manual for more help.
3. Upgrading the firmware
It is important that you make sure your sensorProbe base unit(s) are running on the latest,
officially released firmware that is on our website. You can download the latest firmware by
connecting to our website
https://www.akcp.com/support-center/firmware-updates/
and log in
using the account information you have previously setup on our support portal. All of our entire
family of sensorProbe base units use the same firmware.
When you download the firmware it will come in compressed .zip package. Extract this to your
desktop into a folder named firmware. When you open this folder you will see something like the
following:
You can see one of these files is a program named IPSet. This utility will upload the firmware to
your unit. Double click the program to boot it.
Updated until firmware 476
- 12 -
Advertisement
Need help?
Do you have a question about the sensorProbe2 and is the answer not in the manual?
Questions and answers