Specifying The I 2 C Initialization Sequence - Texas Instruments TAS3308EVM User Manual

TAS3308 Software Installation
Then verify that the "Execute on reset" box is checked.
At this point a process flow can be built using the TAS3308 application framework, the TAS3308 I/O
components and the audio processing components.
Building and running a process flow
A good starting point is to load the predefined TAS3308 Test process flow.
This flow is loaded by selecting File/Open.
18 Quick Setup Guide
Figure 2-3. Specifying the I
2
C Initialization Sequence
www.ti.com
SLEU093 – March 2008
Submit Documentation Feedback