Figure 82 Certificate Settings - Acer ARMC_3P User Manual

C 5: M O
HAPTER ENU PTIONS
To create and install a SSL certificate for the ARMC/3P the following steps are
necessary:
Create a SSL Certificate Signing Request using the panel shown in Figure
•
82. You need to fill out a number of fields that are explained below. Once
this is done, click on the Create button which will initiate the Certificate
Signing Request generation. The CSR can be downloaded to your
administration machine with the Download button (see Figure 83).
Send the saved CSR to a CA for certification. You will get the new
•
certificate from the CA after a more or less complicated traditional
authentication process (depending on the CA).
Upload the certificate to the ARMC/3P using the Upload button as shown in
•
Figure 83.

Figure 82 Certificate Settings

87