Figure 57 Main View - Acer ARMC_3P User Manual

60
Disable Drive Redirection
If enabled the Drive Redirection is switched off.
Force read-only connections
If enabled the Write Support for the Drive Redirection is switched off. It is not
possible to write on a redirected device.
Click Apply to submit your changes.
Software Requirements
To use this feature, you have to install the Drive Redirection software that is
currently only available for Microsoft Windows. This software can be
ARMC/3P CD.
Configuration
Specify the parameters of the network connection (see Figure 57).
Device
This is the address (either the DNS name or the IP address) of the ARMC/3P
you would like to connect to.
Port
This is the network port. By default, ARMC/3P uses the remote console port
(#443) here. You may change this value if you have changed the remote
console port in your ARMC/3P's network settings.

Figure 57 Main View

P U G
RODUCT SER UIDE
found on your