Acer ARMC_3P User Manual page 91

C 5: M O
HAPTER ENU PTIONS
Basic Network Settings
IP auto configuration
With this option you can define if the ARMC/3P should fetch its network
settings from a DHCP or BOOTP server. For DHCP select "dhcp" and for
BOOTP select "bootp" accordingly. If you choose "none" then IP auto
configuration is disabled.
Preferred host name
Preferred host name to request from DHCP server. Whether the DHCP
server takes the ARMC/3P's suggestion into account or not depends on the
server configuration.
IP address
IP address in the usual dot notation.
Subnet Mask
The net mask of the local network.
Gateway IP address
In case the ARMC/3P should be accessible from networks other than the
local one, this IP address must be set to the local network router 's IP
address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option
may be left empty, however the ARMC/3P will not be able to perform name
resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be
used in case the Primary DNS Server cannot be contacted.
Miscellaneous Network Settings
Remote Console And HTTPS port
Port number at which the ARMC/3P's Remote Console server and HTTPS
server are listening. If left empty the default value will be used.
HTTP port
Port number at which the ARMC/3P's HTTP server is listening. If left empty
the default value will be used.
79