User Console; Figure 73 User Console Settings (Part 1) - Acer ARMC_3P User Manual

70
The following settings are user specific. That means the admin can customize
these settings for every user separately. Changing the settings for one user does
not affect the settings for the other users.
Remote Console Settings for User
This selection box displays the user ID for which the values are shown and for
which the changes will take effect. Select the desired user from the selection box
and press the Update button. This will result in displaying the according user
settings below.
Note: You are allowed to change the settings of other users only if you have
the necessary access rights for this task. For a regular user without the
correct permissions it is not possible to change the settings for any other
users.
Transmission Encoding
The Transmission Encoding setting allows changing the image-encoding algorithm
that is used to transmit the video data to the Remote Console window. It is possible
to optimize the speed of the remote screen depending on the number of users
working at the same time and the bandwidth of the connection line (Modem, ISDN,
DSL, LAN, etc.).
Automatic detection
The encoding and the compression level is determined automatically from the
available bandwidth and the current content of the video image.
Pre-configured
The pre-configured settings deliver the best result because of optimized
adjustment of compression and color depth for the indicated network speed.
Manually
Allows to adjust both compression rate and the color depth individually.

Figure 73 User Console Settings (Part 1)

P U G
RODUCT SER UIDE