Initial Configuration; Armc/3P Psetup Tool; Table 4 Initial Network Configuration - Acer ARMC_3P User Manual

C 3: C
HAPTER ONFIGURATION
The ARMC/3P's communication interfaces are all based on TCP/IP. It comes
preconfigured with the IP configuration listed in Table 4 Initial Network Configuration.
Parameter
IP auto configuration
IP address
Netmask
Gateway
IP access control
If this initial configuration does not meet your requirements, the following describes the
initial IP configuration that is necessary to access the ARMC/3P for the first time.
The psetup tool is used to determine the IP address assigned to the ARMC/3P by the
DHCP server or to change the device's initial network configuration.
Connect the ARMC/3P to your computer via local network. Start the psetup tool,
which can be found
is installed or any other computer which is part of the same local network.
Note: If your network provides a properly configured DHCP server the
ARMC/3P should be automatically assigned an IP address. Please ask your
DHCP admin for the IP address the ARMC/3P got from the DHCP server.
A window opens as seen in Figure 17 (on a Windows OS) and Figure 18 ARMC/3P
Psetup Tool (Linux Version).

Table 4 Initial Network Configuration

on your ARMC/3P CD, on the computer in which the ARMC/3P
Value
DHCP
none
255.255.255.0
none
none
17