Authentication - Acer ARMC_3P User Manual

20
Using the Psetup Tool for Windows
On the upper left corner, the MAC address of the ARMC/3P is displayed. To
detect the MAC address manually, press the button Refresh Devices. The
displayed MAC address is the same MAC address printed on the white
sticker placed on the back of the ARMC/3P. On the lower right corner of the
window, there are two buttons: Query Device and Setup Device. Press the
Query Device button to display the preconfigured values of the network
configuration. The values are displayed in the text fields located above. If
necessary, adjust the network settings to your needs. To save the changes
enter an user name and an according password. Then press the Setup
Device button.
Using the Linux Psetup Tool
On the top of the window the MAC address of the device is displayed. To
detect the MAC address manually, press the button Refresh. The displayed
MAC address is the same MAC address printed on the white sticker placed
on the back of the ARMC/3P. Furthermore, there are two buttons on the
window: Query Device and Setup Device. Press the Query Device button
to display the preconfigured values of the network configuration. The values
are displayed in the text fields located nearby. If necessary, adjust the
network settings to your needs. To save the changes enter an user name and
an according password. Then press the Setup Device button.
To adjust the authentication settings, enter your login as a super user and change
your password.
Super user login
Enter the login name of the super user. The initial value is "admin".
Super user password
Enter the current password for the super user. This initial value is "password".
New super user password
Enter the new password for the super user.
New password (confirm)
Re-type the new password for the super user.
To close the window and accept the changes press the OK button, otherwise press
the Cancel button (on Windows). On a Linux system close the window by the
appropiate button of the window frame.
P U G
RODUCT SER UIDE